Here is the latest Turbo Kit RTR Package designed to get you up and running ahead of the pack right away!

The WERKS Stage 2 375hp turbo kit RTR Package for the 2.4L Solstice/SKY has arrived! Bolt our stage 2 system on and bolt on over 160hp!!!

Stock 2.4L NA cars dyno in the 130-140whp range, bolt on our kit and you’ll be dynoing in the 300-315whp range! An increase of over 160whp brings your car to 375hp at the crank!

The kit includes –

WERKS custom polished aluminum intercooler piping
WERKS tubular stainless steel exhaust manifold
WERKS stainless steel O2 housing
Garrett “50 trim” turbocharger
TIAL 38mm external wastegate in your choice of colors
TIAL Race BOV in your choice of colors
WERKS 3″ air intake system
WERKS custom stage 2 ecm re-programming
Aeroquip stainless lines
Turbo XS Manual Boost Controller
40lb/hr fuel injectors
WERKS return fuel system with adjustable fuel pressure regulator
Walbro 255lph in line fuel pump
WERKS custom Front mount intercooler
Polished stainless steel heat shield
All necessary installation hoses, line and fittings
SPEC Stage 2+ Clutch
WERKSracing aluminum radiator
1 Bottle or Redline Water Wetter
Complete installation instructions

Force Performance has released an 82HTA turbo for the 03-06 Evo 8/9 (will only fit Evo 8 with new lines and a new compressor outlet elbow). This turbo has been named the FP Black and is for those customers who want more power than the FP Red can offer. These turbos are in stock.

Product: Forced Performance Black 82HTA Turbo
Application: 03-06 Mitsubishi Evolution 8/9 will only fit Evo 8 with new lines and a new compressor outlet elbow)
MSRP: $1999

Available November 16th, 2009

FP Evo 9 Black 82HTA Turbo w/ 80mm Surge Port w/ 18 PSi actuator
*Will Fit Evo 8 with new lines and a new compressor outlet elbow*

Dayta over on the RedlineForums is selling his 2006 Chevy Cobalt with a turbo kit.. he says:

Im selling my 2006 cobalt ss
She has 34,000 miles on her. Never seen snow always garaged. the last 4k miles were with the turbo kit. i pieced the whole kit together and had SMG install and tune it.
Nothing is wrong with the car at all. Yes you will get an exhaust with the car, i just have the axleback off in the pic.
Car made 342 hp 328ftlbs on 22 psi
i owe 17k still on her and looking for around 14kobo. my dad said he’d pay off the rest of the car and ill just pay him back.

If your serious about wanting her pm me and ill tell you all about the car
Again, i still owe $17k and looking for $14k obo, shoot me a price, i might take it.

[More Info]

From Jabbasport over on briskoda.net.

Hi Guys.

Here’s a power graph of warwick hunt’s Fabia vRS with our stage 3 diesel turbo kit installed..

The Red graph is power/torque with stock injectors, the blue graph is stock injectors with water/methanol injection.

Quick run-down is:
Standard PD130 engine & head.
JabbaSport Cast Exhaust Manifold
Jabbasport Garrett Turbocharger
JabbaSport De-Cat Downpipe
Blueflame Cat-Back Exhaust
Jabbasport Single Mass Flywheel
Sachs Clutch Kit
Quaife Differential
Pro-Alloy Intercooler
Stage 2 Snow Performance Water/Methanol Injection (175mm Inj)
JabbaSport Custom Map

From punishment over on DSMTuners:

We havent posted in a while, its been very busy over here. I wanted to take sometime to give an update our shop car and the goals for the car. For next year we plan on doing less drag racing and focusing more on SCCA/Road Racing. Primarly Watkins Glen and other tracks in the North East.

First we are starting with brake and suspension upgrades. Look for future updates on what we are doing.

We are also designing a new turbo kit specifically for the track and street, Watkins Glen is where it will get tested and perfected.

Also through the winter we are going to be working on our new intake manifold which will be available probably in spring. After we put it through extensive testing on the track. This will be fully built in house by Tim, which if you have seen his work it speaks for itself. Be looking for this new item in Spring.

Now for your viewing pleasure some photos of the car as it sits:

Quik over at Tremek has started a build thread on his Turbo Camaro. See below:

Well here is the run down of the project. driveline is a 02 4.8 [293ci motor] PTe88 turbo, Viper spec’d T56, 230/236 cam, ls2 intake, 241 heads. this exact setup made 702 rwhp and 565rwtq in my silverado with pig rich AFR of 10.4. Since the camaro is about 1k pounds lighter then the silverado i was curious to see how the setup would preform in a lighter chassis. I shift this setup at 7500 rpms but might bump that up a few hundred rpms. Car is going to have powersteering and all the bells and whistles, this isnt a track car just a street warrior that will see track times but again isnt a full out track setup. I know auto would be faster but isnt an option.

here are the mock up pics of setup. some of this kit is carried over from the silverado. also this will be exiting thru a CME but will use a cutout off the downpipe for track days

when fiinshed car wil lbe electron blue with white 35th aniversary stripes. wheels are OEM C6Z06 wheels with a **** harrel clone widebody kit. engine bay has been smoothed and filled. the holes created from turbo kit will be filled and smoothed once again. all wires are going to be tucked and hiddend under the chassis. this will be a drawnout project

well today i worked on my rad support so i could use stock rad and fans. i cut rad support like many do and the piece that was removed was skinned and overlapped over the remaining piece. goal was to remain as stock looking as possible and doing this i still have strenght of stock and lines of stock as well. I also drilled out the spot welds holding the lower rad support in place. im sliding this peice foward to allow myself to keep the same angle of stock rad/fan setup.

still up in air if i should triangluate the rad support for more strenght, ran short on time to finish more of it. Have to head to class

made some more progress today.

first up you can see how the rad is supported. i used 1×1 tube and cut it in half then i used stock rubber holders from the plastic rad cover and used them as the feet. I then had a cover break’d formed and also used a set of rubber holders on top

im going to build a air deflector to direct the air from nose of car down to lower part of the IC and one from nose to top of IC this way the air is directed into the IC only

you can see in the pics the stock lower air deflector is in place just moved forward and reangled and works more as a scope to help direct air into the rad

now you can see the pics of the fuel rails and regulator. I Had it this way wihen i twas in the silverado and works well in the camaro. its hidden which i like the plan for this build is to be as clean as possible and things hidden

Read more here: Turbo Camaro Project

This is a 02 camaro SS with 4L80e 3400 yank, Ford 9″ with 3.50 gearing, Ls6 cam, stock springs and shocks, UMI and sphon suspension on 27″ QTPs. Turbo kit was locally built, this was going thru full 4″ exhaust. RUn was made on 93 octane only no meth and 18* timing on 12 psi

10.55 @ 130 with 1.54 60′

car is ful weight minus AC weighs in around 3900lbs with driver

this car was tuned by Quik of 412 Motorsports using HPtuners and OLSD

2009 Subaru STi – AMR T900R Turbo Kit

2003 – 2006
LANCER EVOLUTION
EVOLUTION MR
EVOLUTION RS
EVOLUTION SE L4 2.0 T 4G63 GAS

Agency Power has finished testing on their all new Turbo Kit for the 2003 and up Mitsubishi EVO VIII, RS, and MR Edition vehicles. The AP turbo kit is designed to offer the consumer several different options for their vehicle needs. The kit is available with a T3/T4 50Trim Turbo for the daily drivers and road racers. As well, the kit is available with a 60-1 Turbo for the customer wanting to do big horsepower numbers in either drag racing or road racing scenarios.

What sets the Agency Power EVO VIII Turbo Kit aside from the competition is its quality, performance, and presentation that has been proven. Originally tested at the famous Willow Springs Raceway in the Vivid Racing EVO VIII, the prototype helped carry the VR EVO to fast lap times placing in the first Subaru, EVO, Mini shootout. With making full boost by 4000 rpm, the 50Trim kit was on its way to success.

Once the final production unit was finished, we took a stock EVO VIII and added some common parts to get our results. Without going over board to gain high numbers, we put together the car with some of the basic upgrades most people do. Products – B&B downpipe, B&B catpipe, JIC 505 catback Exhaust, Turbo XS UTEC, Perrin MBC, HKS 264 Intake and Exhaust camshafts, ARP Head Stud Bolts, Blitz 700cc Injectors, Agency Power Fuel Rail, and Walbro Fuel Pump.

With the new turbo kit installed, we took the EVO VIII to the local All Wheel Drive Dyno Jet facility. Dynoing the stock car at 220 wheel horsepower, we had a good baseline to tune upwards from. Since most vehicles run everyday on 91-octane pump gas, we tuned it with this gas first for a real life number. The 91-octane map at 1.5 bar (23lbs) of boost put down 330 wheel horsepower (429 Crank HP). Once drained, we filled the tank with 109 Unleaded VP Gas and turned up the boost with a retune. The EVO VIII now made 405 wheel horsepower (526.5 Crank HP) and 358.6 ft/lbs of wheel torque.

Now this is our smaller turbo option! With C16 leaded gasoline (most companies test with this), our 50 Trim kits will make close to 425 wheel horsepower safely on the EVO VIII stock engine. With our 60-1 Turbo Kit, you will achieve about 475 wheel horsepower (617.5 Crank HP).

Why is this kit better then the competition? Well first we give you the ability to switch turbos to your performance needs with nothing but the cost of the turbo. This allows you dial your car in for the type of use it is involved in. Second, all of our piping is T304 stainless steel with ? inch thick flanges. The superior staff at B&B Performance Exhaust assembles the piping, exclusively for Agency Power. Next, we supply high quality and durable SAMCO brand hose couplers. Available in Red, Blue, or Black. These 3 ply silicon hoses do not rip, wear, or fade. We also include stainless steel oil lines for the top and bottom of the turbo. Our bottom line includes screw on flanges for perfect fitment and no leaks. We use a Tial 38mm wastegate with a .7 spring for perfect response. Our custom designed intake tube with recirc fitment works in conjunction with the factory MAF. As well as we provide a short ram intake system that has a 3D machined housing to fit with the MAF and we use a K&N cone filter. The intake includes a bracket for firm fitment. Lastly we include all necessary vacuum lines, gaskets, hardware, clamps, and fittings to make this a true bolt on kit. What finally sets us apart from the competition is our presentation.

2003 – 2006
LANCER EVOLUTION
EVOLUTION MR
EVOLUTION RS
EVOLUTION SE L4 2.0 T 4G63 GAS

With the success of the Agency Power T3/T4 EVO Turbo Kit since 2003, Agency Power has taken horsepower to a new level with its GT30R and GT35R kit for the Mitsubishi EVO VIII and IX vehicles. Designed for serious racers or those wanting ultimate power on the street, this kit yields nearly 30psi of boost with appropriate mods and makes almost 720 Crank Horsepower!

Why is this kit better then the competition? Well first Agency Power uses extremely high quality 321 stainless steel piping for all its components. Piping is all polished and TIG welded for flawless finish. The kit has been fitted and jigged on the EVO 4G63 motor in and outside the car to ensure its precise fitment. We use genuine Garrett ball bearing turbo’s to our specs ensuring quick spool and great horsepower and torque curves. As well the kit has been dyno tested on a Mustang AWD dyno with numerous cars to ensure its capacity. We have even tested and tuned it on the road course of Phoenix International Raceway.

The kit includes all parts necessary for a bolt on kit. This includes a Tial 38mm wastegate, GT30R or GT35R ball bearing turbo, header, down tube, wastegate dump pipe, intercooler adapter pipe, turbo inlet hose, steel braided oil lines, new clamps, high quality AP silicone hose adapters, K&N high flow cone air filter, and all necessary fittings and hardware.

We suggest having appropriate computer tuning, fuel components, upgraded intercooler, camshafts, head studs, and exhaust parts for maximum performance.